Fluke 190-104/S ScopeMeter with FlukeView ScopeMeter Software & Hard Case

Usually ships within 1-2 weeks
FE 190-104/AM/S

Price: $4,399.95

Request a Quote
Ask an Expert

The new Fluke 190-104/S (190/104/AM/S) Series II ScopeMeter is a 4-channel portable hand held oscilloscope built for CAT III & IV environments. This model is a kit that includes the Fluke 190-104 ScopeMeter, Fluke C290 hard case and a full version of FlukeView for ScopeMeters software.

It easily works with 3-phase applications for many industrial applications like motors and variable speed drives and includes all the key features of the original Fluke 190 series ScopeMeters.

The Fluke 190-104/AM model is a 100MHz bandwidth model that provides real-time sampling rates up to 1.25GS/s.


  • Automation: PLC's, sensors, transducers, motion controllers, rotary encoders, scanners, readers, printers
  • Medical Imaging: XRay, MRI, ultrasound imaging equipment
  • Avionics: Flight line navigation systems, communication systems, radars, on board aircraft control systems
  • A/V and Security Systems: Retail security devices, surveillance and monitoring equipment, RFID

Fluke 190 Series II ScopeMeters

The Fluke 190 series of portable oscilloscopes are now extended with new 4 channel models designed for the industrial plant maintenance professionals servicing, installing or maintaining heavy duty electrical equipment, electro-mechanical machinery and plant automation control systems. The 190 series II ScopeMeters are the first portable oscilloscopes with a 1000 V CAT III / 600 V CAT IV safety rating.

Fluke ScopeMeter test tools are hand held, battery operated portable instruments with a sealed, dust and drip proof case that is IP 51 rated, designed to be used in harsh environments.

The new Fluke 190 series II now includes new features for troubleshooting todays industrial power electronic systems and enhancements that will improve usability and overall satisfaction.

New Features and Functions for Industrial Equipment Maintenance Applications

  • IEC 61010 1000V CAT III / 600V CAT IV Safety rating
  • 4 fully isolated floating input channels with up to 2.5 GS/s real time sampling rate
  • 8ns Glitch detect
  • 10,000 sample deep memory per channel for displaying high resolution waveform details
  • 4 input channels provide, 4 meter measurements, 4 TrendPlot traces, 4 ScopeRecord traces, capturing or logging 4 inputs over time
  • Live Zoon with full resolution
Customer Driven Enhancements
  • Hi-capacity Li-ion battery with up to seven hours of operation
  • Battery access door to easily swap out batteries for extended operation
  • Two electrically isolated USB ports. Mini USB-A for PC connectivity and a USB memory device port
  • Security slot to lock down instrument using standard Kensignton PC lock
  • Screen insert for standard camera mounting accessories
Plus all the Key Features and Benefits of the existing ScopeMeter 190 Series
  • Up to 200 MHz bandwitdth, 2.6 GS/s real time sample rate up to 400 pico seconds resolution
  • Built-in multimeter
  • Connect and View to easily trigger on and display even complex waveforms
  • TrendPlot and ScopeRecord to capture or plot waveforms and measurements over extended time spans
  • Reply Last 100 Screen, to go back in time to see waveform anomalies
  • Environmentally tested to meet IP 51 dusty and drip proof rating and withstand 3G vibration or 30g shock

Other Fluke 190 Series II models:

  • Fluke 190-104/AM - This is the base model that only includes the scopemeter
  • Fluke 190-204/AM - This is the 200MHz series II model
  • Fluke 190-204/AM/S - This 200MHz model includes the Fluke C290 hard case and full version of FlukeView ScopeMeters software

What's Included:
  • C290 Hard case
  • BC190 Power Adapter
  • BP291 High-capacity Li-ion battery pack
  • VPS410-R red probe
  • VPS410-B blue probe
  • VPS410-G gray probe
  • VPS410-V green probe
  • USB A-B mini cable
  • Hanging strap
  • Side strap
  • CD user manual with FlukeView ScopeMeter software
  • Statement of calibration practice
The Good:

The Bad:

The Bottom Line:

Full Review

4 Isolated Floating Channels
  • Safely perform differential or floating measurements on multiple signals simultaneously
  • View and measure waveform amplitude, shape and timing differences between signals or 4 test points
100V CAT III / 600V CAT IV
  • Safely perform measurements on equipment that is permanently installed to plant electrical distribution systems (Installation category III/IV)
Li-ion battery & access door
  • Hi-capacity battery to operate scope for up to 7 hours.
  • Battery door allows for an easy switch of batteries to extend operating time
Connect&View, ScopeRecord, TrendPlot and 100 Screen reply, easy to use
  • Connect&View, hands free operation, trigger, capture and display complex waveforms
  • ScopeRecord, TrendPlot & 100 Screen Replay, functions designed to record waveform data over extended time and capture intermittent faults.

Real-time sample rate
Independently floating isolated inputs
Up to 1000V between inputs, references and ground
Timebase range
5ns - 2 min/div
Input sensitivity
2mV - 100V
Trigger types
connect-and-View, Free Run, Single Shot, Edge, Delay, Video, Selectable pulse width and External
Dual slope trigger and Event trigger (n-cycle)
Glitch capture
Scope measurements
Cursor: 7
Automatic: 30
Maximum record length
ScopeRecord mode: 27,500 pts per input
Scope mode: 10,000 pts per input
Screens + Setups: 15
Reply + Setups: 2
153mm full color LCD with fast update rate
Digital persistence giving analog oscilloscope-like waveform decay
Waveform Compare
Waveform reference with automatic Pass/Fail testing
Operating Temperature
0C to 40C including batteries
0C to 40C excluding batteries
Storage Temperature
-20C to +60C
Operating Altitude
Up to 2,000m (6666ft) for CAT IV 600V, CAT III 1000V; up to 3,000m (10,000ft) for CAT III 600V, CAT II 1000V
Electrical Safety
1,000V CAT III/600V CAT IV (EN61010-1)
270 x 190 x 70 mm
3 years on main instrument, 1-year on accessories
Battery Life
Li-ion: Up to 7 hrs
FlukeView ScopeMeter SoftwareFlukeView ScopeMeter software adds PC power to your Fluke ScopeMeter

FlukeView ScopeMeter software helps you get more out of your ScopeMeter by:

Documenting: Transfer screens, waveforms, and measurement data from the ScopeMeter to your PC for printing, or to import data to other programs.

Archiving: Store and retrieve waveforms with text annotations and create your own library for easy reference and comparison.

Analysis: Gather valuable measurement data and enable cursor measurements to reveal relationships and conditions. Extended recording of up to four user-selected measurements help you monitor and analyze slow moving signals and related events. Upload waveforms to the PC and use cursors for detailed measurements. Perform waveform analysis, including analyzing harmonics.

        For ScopeMeter 190 & 120 Series
        Windows 95/98/Me/NT4.0/2000/XP
        Requires one free RS-232 port (COM port)
        Requires optional PM9080 RS-232 Adapter/Cable
No user reviews available.

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: