Home » Electrical » Power Factor Meters » PIECAL 211 Automated RTD Source Temperature Calibrator
PIECAL 211 Automated RTD Source Temperature Calibrator
- Easy to use
- Large backlit display
- Rubber boot and rugged switch
- NIST Calibration certificate included with every unit
Part Number:
PIECAL 211
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$1150.00 
USD (change)
USD (change) 
The PIECAL 211 is a rugged, easy to use Automated RTD Source Temperature Calibrator you can use to check & calibrate all your RTD instruments and measure RTD sensors.
The PIECAL 211 gives you the ability to:
PIECAL 211 vs. Altek 211
In comparison the PIECAL 211 improves upon other popular calibrator brands, such as the Altek 211, by including a larger display with backlight, making it easier to use, its compatible with more instruments, advanced troubleshooting and more!
To learn more about these competitive differences, download the PIECAL 211 vs. Altek 211 sheet.
The PIECAL 211 gives you the ability to:
- Calibrate newer instrumentation - Works with Rosemount & Honeywell smart transmitters, PLCs, DCSs, multi-channel recorders and other pulsed excitation devices.
- Easy viewing - Large backlight display
- Easily change RTD types - Reconfigure without resetting calibrator
- Verify RTD temperature & output - Secondary display of ohms to check RTD tables
PIECAL Calibrators Competitive Edge
PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke under the Altek label.PIECAL 211 vs. Altek 211
In comparison the PIECAL 211 improves upon other popular calibrator brands, such as the Altek 211, by including a larger display with backlight, making it easier to use, its compatible with more instruments, advanced troubleshooting and more!
To learn more about these competitive differences, download the PIECAL 211 vs. Altek 211 sheet.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Easy to use
- Protected with a rubber boot and rugged, low profile switch
- Calibrate directly in temperature
- Fast calibration with automatic output stepping
- Compatible with All process instruments
- Measure RTD sensors
- Evolutionary design
| General | |
| Accuracy | ±(0.025% of Reading + 0.05 Ohms) |
| Temperature Drift | ± 0.01% of span outside of 23°C ±10 °C (73°C ±18 °F) |
| Operating Temperature Range | -25 to 60°C (-10 to 140F) |
| Relative Humidity Range | 10 % ≤RH ≤90% (0 to 35°C), Non-condensing |
| 10% ≤RH ≤70% (35 to 60°C), Non-condensing | |
| Size (L x W x H) | 5.63 x 3.00 x 1.60 in (143 x 76 x 41mm) |
| Weight | 12.1 oz, 0.34 kg (including boot & batteries) |
| Batteries | Four "AA" Alkaline 1.5V (LR6) |
| Battery Life | 50 hours |
| Optional NiMh Rechargeable battery kit | 120VAC for North America Only; charger, four NiMh batteries, AC & DC cords |
| Lower Battery | Low battery indication with nominal hour of operation left |
| Protection against misconnection | Over-voltage protection to 60 V dc |
| Display | High contrast graphic liquid crystal display. LED backlighting for use in low lit areas. |
| Read | |
| Excitation Current | 0.5 mA nominal |
| Normal Mode Rejection | 50/60 Hz, 50 dB |
| Common Mode Rejection | 50/60 Hz, 120 dB |
| Source | |
| Accuracy From 1 to 10.2 mA External Excitation Current Below 1 mA of External Excitation Current | ± (0.025% of Reading + 0.05 Ohms) ± (0.025% of Rdg + 0.025 mv + 0.05 Ohms) mA Excition Current |
| Resistance Ranges | 0.00 to 410.00, 410.1 to 2001.0 Ohms |
| Allowable Excitation Current Range | ≤410 Ohms: 10.2 mA max; stead or pulsed/intermittent 410 to 2001 Ohms: 1 mA max; steady or pulsed/intermittent |
| Pulsed Excitation Current Compatibility | DC to 0.01 second pulse width |
Product brochures
Technical documents
No user reviews available.
