Power Cost Monitor WiFi Gateway

Sorry, this product is discontinued and is no longer available for purchase. Please call 1-877-766-5412 to find a suitable replacement.


The PowerCost Monitor WiFi is an upgrade accessory for the popular PowerCost Monitor home electricty monitor. This WiFi accessory is a gateway that allows you to monitor your home's real-time electricity usage data online. It works with all PowerCost Monitor models and is also compatible with the Black&Decker Power Monitor.

System Requirements

  • Wi-Fi accessible broadband internet connection with 802.11b support
  • PC or laptop with Windows® XP SP3 (or later)
  • Blue Line Innovations PowerCost Monitor
  • 802.11B MAC (802.11B/G and 802.11n Draft 2.0 compatible)
  • Up to 2Mbps data rate
  • Power Output +10dBm (10mW) Security
  • 40/60-, 128-, 152-bit WEP
  • Wi-Fi Protected Access (WPA/WPA2)



What's Included:
  • PowerCost Monitor WiFi device
  • AC adapter
  • USB cable
  • Quick Start Guide
  • 1-year limited hardware warranty
The Good:


The Bad:


The Bottom Line:

Full Review

  • Track your current and historical energy usage.
  • Understand where your home’s energy goes and how you can start saving today.
  • Monitor your home’s carbon footprint and learn how to help reduce your impact.
Product Specifications
Part # BLI 31100
UPC code 094922017611
Package Unit Weight: .75 lbs (.34kg)
Width: 9.37 in (23.8 cm)
Height: 7.09 in (18 cm)
Depth: 2.13 in (5.4 cm)
Packaged Unit Weight: 10.67 lbs (4.85 kg)
Width: 14.92 in (37.9 cm)
Height: 10.94 in (27.8 cm)
Depth: 15.67 in (39.8 cm)

System Requirements
WiFi accessible broadband Internet connection with 802.11b support
PC or Laptop with Windows® XP SP3 (or later)
Blue Line Innovations PowerCost Monitor™ or Black & Decker Monitor™

Wireless
802.11B MAC (802.11B/G and 802.11n Draft 2.0 compatibility)
Up to 2Mbps data rate
Power Output +10dBm (10mW)
Security
40/60-, 128-, 152-bit WEP
WiFi Protected Access (WPA/WPA2)

Configuration & Management
PC application to configure WiFi settings and update firmware

Physical Dimensions
5” diameter X 1.5” (125mm diameter X 45mm)
6.7 oz (180g) not including AC adapter

Power Requirements
100v-240v AC
6.4W max

Popularity: 25.30%
Customer Ratings: 4.0 of 5 (1 reviews)
Recommended: YES: 1  |  NO: 0
It works
Roy RECOMMENDS THIS PRODUCT
September 09, 2010

The Good:
I have installed the PowerCostMetor first at a store front, then purchased WiFi Gateway later on line. The location of the WiFiGateway is very close to the PowerMeter outdoor so the signal strength is very good and MS holm UI is reasonably intuitive.

The Bad:
Little too big. Ideally, WiFi should be an integral part of the PowerCostMonitor and eliminate Mickymouse and simplify the installation.

The Bottom Line:
Works, good enough for you and me house owner.

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: