Home » Electrical » Power Factor Meters » AEMC CM605 Low Current Clamp-on Meter (100AAC/DC)
AEMC CM605 Low Current Clamp-on Meter (100AAC/DC)
Part Number:
AEMC CM605
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$249.00 
USD (change)
USD (change) 
The AEMC CM605 Multifunction Clamp-on Meter is an ideal choice for both process and general industrial markets. It is also the perfect instrument for measuring 4 to 20mA process signals, as well as, the higher currents (up to 100A) associated with general industrial monitoring and troubleshooting.
The AEMC CM605 is a versatile device that is capable of measuring both AC/DC voltage, up to 600V, and AC/DC current. It can also measure resistance up to 10kΩ and includes a continuity buzzer to assist in circuit verification.
For operator convenience, the AEMC CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
Applications:
The AEMC CM605 is a versatile device that is capable of measuring both AC/DC voltage, up to 600V, and AC/DC current. It can also measure resistance up to 10kΩ and includes a continuity buzzer to assist in circuit verification.
For operator convenience, the AEMC CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
Applications:
- Process loop monitoring
- Automotive electrical troubleshooting
- Industrial plant maintenance
- General AC and DC voltage and current monitoring
- Continuity checking
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- 10,000-count LCD Display - Excellent Resolution
- 100AAC/DC Ammeter with low 10A Range (1mA Resolution)
- Tapered Jaws for crowded wiring or areas (Ø .45" - 12mm Jaw Opening)
- 600VAC/DC Voltmeter
- Analog Output in AAC/DC
- Auto-Ranging & ADC Zero Push-button
- Data HOLD & PEAK Functions
- Relative Function to Compare Two Measurements
- Ohm Range & Continuity Test with Beeper, 600V Protection
- Batteries: AUTO-OFF and Low Battery Indicator
- IEC/EN 61010 Safety Rated & CE Mark
| ELECTRICAL | |
| AC Current | |
| Measurement Ranges | 2 Ranges: 10A, 100A |
| Accuracy & Resolution | 10A: 2.0% ± 10cts - 1mA Resolution 80A: 2.0% ± 10cts - 10mA Resolution > 80A: 3.5% ± 10cts - 10mA Resolution |
| Frequency Range | 2 Ranges: 50 to 500Hz |
| DC Current (positive only) | |
| Measurement Ranges | 2 Ranges: 10A, 100A |
| Accuracy & Resolution | 10A: 2.5% ± 10cts - 1mA Resolution 80A: 2.5% ± 10cts - 10mA Resolution > 80A: 4.5% ± 10cts - 10mA Resolution |
| AC Volts | |
| Measurement Ranges | 600Vrms |
| Accuracy & Resolution | 1.5% ± 5cts - 100mV Resolution |
| Frequency | 40 to 500Hz |
| Input Impedance | 10MΩ, < 50pF |
| DC Volts (positive only) | |
| Measurement Ranges | 600V |
| Accuracy & Resolution | 1.0% ± 2cts - 100mV Resolution |
| Input Impedance | 10MΩ |
| Resistance (Ohms) | |
| Measurement Ranges | 10kΩ (9999Ω) |
| Accuracy & Resolution | 1.0% ± 3cts - 1Ω Resolution |
| Test Voltage | < 3.0VDC |
| Continuity | |
| Measurement Ranges | Buzzer < 100Ω ± 25Ω |
| Resolution | 1Ω |
| Test Voltage | < 3.0Vdc |
| Analog Output | |
| Output | 10mV/Aac & Adc through front banana jacks |
| Frequency | 0 to 20kHz @ ± 3db |
| Output Impedance | 3kΩ, < 50pF |
| Other Functions | |
| Adc Zero & Relative Function | One touch push button (ΔZERO Button) to Zero Adc, or other readings. Relative function also used in the other ranges to compare two measurements. |
| HOLD Function | Holds A & V measurements when pressed (HOLD button) |
| PEAK Function | Captures PEAK (1ms) V or A measurement when activated (PEAK Button) |
| Auto-Ranging | “AUTO” displayed on LCD |
| Over Range | “OL” displayed on LCD for all measurements |
| Auto-Off | Auto-Off after approx 10 minute with Over-Ride |
| Low Battery | Low Battery indication on LCD |
| Mechanical | |
| Max. Cable Diameter | Ø 0.45" (Ø 12mm) |
| Max. Jaw Opening | 0.60" (Ø 15mm) |
| Power Source | Two 1.5V AAA (LR03) batteries (included) |
| Dimensions & Weight | 7.95 x 2.76 x 1.33" (202 x 70 x 34mm) – 6.5 oz (180g) |
| Safety Standards | IEC/EN 61010-1 and 2-032 – 600V CAT II and 300V CAT III – Pollution Degree 2 Class 2 – Double or reinforced insulation, CE mark |
Product brochures
No user reviews available.
