Veris E30 Panelboard Monitoring System With Split Core CTs

Configure Your Product:

Configuration
VS E30


Price: From $2,660.98

Quantity
Request a Quote
Ask an Expert



The Veris E30 Series Panelboard Monitoring System provides a cost effective solution for electrical load management, making it ideally suited for applications where loads are dynamic, such as the data storage industry, lighting panels, etc.

The Veris E30 series monitors the current and optionally the voltage, power and energy consumption of each circuit in a panelboard including the main breaker. The accumulated information can be transmitted through the communications interface or viewed locally through an optional local display. Data updates occur roughly every two seconds to provide timely preventative maintenance information. As a circuit approaches the user-configured thresholds, alarm indicators are triggered, preventing costly downtime from overloaded circuits or failed loads.

The E30 has solid core CTs and is designed for new panel installations. See the E31 for split core CTs suitable for retrofits applications. All models can be ordered with 24, 48 or 84 CTs with either 3/4" (Square D) or 1" (GE) CT spacings with a nominal voltage from 120V to 480V. In addition there are three measurement options:

Option A: All power, energy (inc. demand), voltage and current-related measurements
Option B: All above except kW and kWh, PF and kVA
Option C: Only current-related measurements

Veris E30 Options, Configuration and Part Numbers

Description CT Spacing# of CTs
E30
A
Advanced Measurements

B
Intermediate Measurements

C
Currently-Only Measurements

0
0.75" Spacing on CTs

1
Spacing on CTs

42
2x strips of 21 CTs

84
4x strips of 21 CTs

Choose one of the options in the drop down box above this description to configure and price your E30 panel board monitoring system.

Applications:
  • Load based cost allocation
  • Overload protection
  • Load management
  • Load balancing
  • Lighting circuits
Features
  • Up to 126 panelboards can be monitored on one RS-485 drop...simplifies wiring
  • Reports volts, amps, power, and energy for each circuit...one product covers the whole panelboard
  • 90 circuits with one product...saves space
  • 3/4” (Square D) or 1 inch (GE) spaced current sensors... flexible installation
  • 4 user-configurable alarm threshold registers... improved load management
  • Built-in ability to set the orientation and numbering of the circuits
  • 1/4 amp to 100 amp monitoring...widest dynamic range in the industry
  • 1, 2, 3 pole breaker support
The Good:


The Bad:


The Bottom Line:

Full Review

  • Up to 126 panelboards can be monitored on one RS-485 drop...simplifies wiring
  • Reports volts, amps, power, and energy for each circuit...one product covers the whole panelboard
  • 90 circuits with one product...saves space
  • 3/4” (Square D) or 1 inch (GE) spaced current sensors... flexible installation
  • 4 user-configurable alarm threshold registers... improved load management
  • Built-in ability to set the orientation and numbering of the circuits
  • 1/4 amp to 100 amp monitoring...widest dynamic range in the industry
  • 1, 2, 3 pole breaker support
  • Operating Temp. Range 0° to 60°C (32° to 140°F) (<95%RH, non-condensing)
  • Storage Temp. Range -40° to 70°C (-40° to 158°F)
  • Power Source 120VAC (+10/-25%) line-to-neutral, 50/60Hz
Measured Current Inputs:
  • Number of Channels up to 42
  • Frequency 50/60Hz
  • Sample Rate 1280Hz
  • Update Rate 1.2 sec
  • Accuracy ±2% of reading from 5A to 50A
  • Overload Capability Tested to 10,000A single cyle
  • Connection to Conductor Solid-core toroid?†
Network Communications:
  • Type Modbus® RTU
  • Connection DIP-switch selectable 2-wire or 4-wire
  • Address DIP-switch selectable address 1 to 247
  • Baud Rate DIP-switch selectable 2400, 4800, 9600, 19200
  • Parity DIP-switch selectable NONE,ODD,EVEN
  • Communication Format 8 data-bits, 1 start-bit, 1 stop-bit
  • Termination 5-position pluggable connector (TX+ TX- SHIELD TX+/RX+ TX-/RX-)
Defaults:
  • Warning Register 60% of current sensor rating (configurable)
  • Alarm Register 70% of current sensor rating (configurable)
  • Current Settings 20 Amp

† Do not apply 300V Class current transformers to circuits having a line-to-neutral voltage greater than 300V, unless adequate additional insulation is applied between the primary conductor and the current transformers. Veris assumes no responsibility for damage of equipment or personal injury caused by products operated on circuits above their published ratings.
No user reviews available.
Recommended Accessories

Display
Name Price Quantity
Veris H8936 Network Display $795.00
Veris H8932 Network Display $695.00

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: