BW Gas Alert Max XT II Multi-Gas Detector with Motorized Pump

Configure Your Product:

Sensors
BW XT


Price: From $795.00

Quantity
Request a Quote
Ask an Expert



Max XT II

The NEW GasAlertMax XT II portable and multi-gas detector simultaneously monitors and displays up to four gases including hydrogen sulfide (H2S) carbon monoxide (CO), new 4-series oxygen (O2) sensor - SR-X10-C1 and combustibles (%LEL). The compact and field tough GasAlertMax XT II features a non-intrusive integrated sampling pump designed for performance, reliability and ease-of-use. SmartSample pump technology improves remote sampling result accuracy and ensures a consistent, uniform flow.

One-button operation guarantees ease of use even while wearing gloves. Tamper-proof, user adjustable options enable the instrument to be customized to suit your specific application. Confined space entry and remote sampling have never been so easy with new intelligent pump technology. Minimize pump blockages and improve remote sampling result accuracy. The GasAlertMax XT II is fully compatible with the MicroDock II automated test and calibration system.

New Oxygen O2 Sensor

The Max XT II uses the new and improved oxygen sensor SR-X10-C1 that lasts longer and ultimately helps reduce replacement costs and down time.

The older Max XT uses the SR-X-MC oxygen sensor and will not work with the new Max XT II gas detector released June 2010.*

* In the accessories list below, you will still see the older oxygen O2 sensor SR-X-MC listed as a sensor option. The SR-X-MC will only work with the older Max XT. We kept this sensor in the list because the part number for the Max XT II is identical to the Max XT and we want to make sure that customers looking for Max XT oxygen sensors could easily find it.



What's Included:

  • GasAlertMax XT II detector
  • Sensors (user specified)
  • Stainless-steel alligator clip
  • Rechargeable battery
  • Charging adaptor
  • 3 ft. / 1 m calibration hose with quick connect
  • 10 ft. / 3 m sampling hose with particulate filter and quick connect
  • Reversible screwdriver
  • Pump filter spares (kit of 5)
  • Instructions and laminated quick reference card
The Good:


The Bad:


The Bottom Line:

Full Review

  • Integrated sampling pump
  • SmartSample technology and powerful diaphragm pump provide reliable block detection and consistent, uniform flow
  • Easy-to-read, multi-language LCD displays all four gas concentrations (H2S, CO, O2 and combustibles) simultaneously
  • Visual, vibrating and audible alarm indicators
  • Low, High, TWA (time weighted average) and STEL (short-term exposure limit) alarms
  • LCD icons help with fast and easy notification of detector operation
  • Built-in concussion-proof boot
  • Simple auto-calibration procedure
  • Rechargeable batteries provide enough power for a 13-hour shift
  • Best in class block detection with semi-conductor pressure sensor
  • Easy, one-button interface for simple operation
  • Flexible user options minimize training
  • Tamper-proof field operation
  • Multi-language support in English, French, German, Spanish and Portuguese
  • Compatible with MicroDock II automated test and calibration system
Instrument dimensions:13.1 x 7.0 x 5.2 cm (5.1 x 2.8 x 2.0 in.)
Weight:300 g (10.6 oz.)
Operating temperature:-20°C to +50°C (-4°F to +122°F)
Storage temperature:-40°C to +60°C (-40°F to +140°F)
Operating humidity:10% to 100% relative humidity (non-condensing)
Dust and moisture ingress:IP66/67
Alarm setpoints:May vary by region and are user-defined
Detection range:
  • H2S: 0 – 200 ppm (1 ppm increments)
  • CO: 0 – 1000 ppm (1 ppm increments)
  • O2: 0 – 30.0% vol. (0.1% vol. increments)
  • LEL (combustible): 0 – 100% LEL (1% LEL increments) or 0 – 5.0% v/v methane
Sensor type:
  • H2S, CO, O2: Single plug-in electrochemical cell
  • LEL (combustibles): Plug-in catalytic bead
O2 measuring principle:Capillary controlled concentration sensor
Alarm conditions:TWA alarm, STEL alarm, low alarm, high alarm, multi-gas alarm, over limit (OL) alarm, low battery alarm, confidence beep, automatic deactivation alarm, pump alarm
Audible alarm:95 dB+ at 30 cm variable pulsed beeper with full battery charge
Visual alarm:Red light-emitting diodes (LEDs)
Display:Alphanumeric liquid crystal display (LCD)
Backlight: Activates upon startup and when the pushbutton is pressed; deactivates after 10 seconds. Activates during an alarm condition and remains lit until alarm ceases
Self-test:Initiated during activation, self-test runs continuously while detector is operational
Calibration:Automatic zero and automatic span
User field options:Startup message, lockout on self-test error, safe mode, confidence beep, latching alarm, force calibration, cal IR lock, force bump, location logging, force block test, set datalog interval, set confidence interval, language selection.
Sensor Options:Sensor enable/disable, set span concentration values, set calibration interval, set bump interval, set alarm setpoints, set STEL interval, set TWA period, auto zero at startup enable/disable, 5% overspan, low alarm acknowledge, oxygen measurement, and combustible gas measurement
Battery operating time:One rechargeable lithium polymer battery at 20°C provides 13 hours operating runtime
Fleet Manager II allows you to conveniently manage your gas detectors.

Data storage and analysis has never been so simple. With the same look and feel as Fleet Manager, Fleet Manager II allows users to download information directly from BW instruments or the MicroDock II.

Free Download BW Technologies Fleet Manager II SoftwareFree Download
(Before downloading this software, you must click here and read this)

With improved functionality, users can:

• Automatically create accurate and user-friendly reports
• Easily sort, format and graph data as well as view history
• Archive and share data easily, including databases
• Download and manage calibration and bump check records as well as datalogged information onto any PC

Compatible with:

No user reviews available.
Recommended Accessories

Calibration Gas
Calibration Gas
Calibration Gas
Calibration Kits
Cases & Holsters
Communications
Confined Space Kits
Filters
Gas Monitors - Software
Power
Sampling
Sensors

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: