Electro Industries introduces a new standard in panel mounted power metering. The Shark 200 metering system is an ultra-compact power metering device, providing industry leading revenue metering functionality combined with advanced data-logging, communication and I/O traditionally found only in high performance and high cost systems. This product is designed to incorporate advanced features in a cost effective, small package for large scale, low cost deployment within an electrical distribution system.
Precision Measurement & Meter Certification Capability
- 400+ Samples / Cycle
- 24 bit A/D Conversion
- 0.2% Accuracy Class
- Traceable Watt-hr Accuracy Pulse
- Utility Peak Demand Metering (Rolling and Block Demand)
V-Switch Measurement Options
The Shark 200 meter is equipped with EIG’s exclusive V-Switch™ Upgrade technology. This technology allows users to upgrade and add features by using communication commands as needed, even after the meter is installed.
Data Logging Capability (V2, V3, V4, V5 or V6 options)
The Shark 200 meter offers the capability of having 2 megabytes of data logging to be used for historical trends, limit alarms, I/O changes and sequence of events. The unit has a real-time clock that allows for time stamping of all the data in the instrument when log events are created.
Historical Logs
- 3 Assignable Historical Logs
- Independently Program Trending Profiles
- Up to 64 Parameters per Log
System Events Log
- Record for anti-tampering purposes:
- Demand Resets· Password Requests
- System Startup· Energy Resets
- Log Resets
- Log Reads
- Programmable Settings Changes
I/O Change Log
- Provides a Time Stamped Log of any Relay Output
- Provides Time Stamped Log of Input Status Changes
- 2048 Events Available
Limit/Alarm Log
- Provides Magnitude and Duration of an Event
- Includes Time Stamps and Alarm Value
- 2048 Events Available
Limits Alarms and Control Capability
- Limit Events
- Any measured parameter
- Up to 16 Limits
- Based on % of full scale settings
- Manual relay control via software
- Relay set delays and reset delays
Power Quality Monitoring
The Shark 200 meter provides basic power quality, providing harmonic recording to the 40th order for voltage and current harmonics magnitude. The unit will also provide above and below limits for voltage, frequency, imbalance and other parameters giving a depiction of the quality of the power system being measured. The harmonics algorithm uses sophisticated active anti-aliasing filtering to provide true and accurate harmonics magnitudes even when higher level harmonic conditions are present.
Waveform Scope
The unit uniquely offers a waveform scope to view the real time waveform for voltage and current. Waveform scope allows the meter to be used as a basic oscilloscope throughout a power system.
Standard Communication
- Back Mounted Serial Port with KYZ Pulse
- RS485 - This port allows RS485 communication using Modbus or DNP3.0 Protocols. Baud rates are from 9600 to 57.6k.
- KYZ Pulse - In addition to the RS485, the meter also includes a KYZ pulse mapped to absolute energy.
- Front Mounted IrDA Communication
- Uniquely, the Shark® 200 meter also has an optical IrDA port, allowing the unit to be set up and programmed using a PDA or remote laptop without need for a communication cable
Field Upgradeable I/O & Communication Options
100BaseT Ethernet Option (INP100S)
The optional Ethernet card gives the unit 10/100BaseT Ethernet capability, and allows it to speak with 12 simultaneous sockets of Modbus TCP. The INP100S also allows you to view meter data on a web page.
Applications
- Utility Metering
- Substations
- Power Generation
- Submetering
- Commercial Metering
- Industrial Metering
- Campus Metering
- Analog Meter Replacement
- Voltage Recording
More Information
 See the EIG Shark 200 power meter Brochure
| |
