Home » Electrical » Power Factor Meters » AEMC 6250 Micro-Ohmmeter 10A

AEMC 6250 Micro-Ohmmeter 10A

AEMC 6250 Micro-Ohmmeter 10A
Part Number:
AEMC 6250
In Stock?
Stock may be available
please call (877)766-5412 to confirm

Quantity

Price:
$3695.00 USD (change)

 

The AEMC 6250 Micro-Ohmmeter (10A) is a rugged, low resistance tester designed for plant maintenance, quality control in manufacturing and field use. Utilizing a four-lead Kelvin method of testing, the AEMC 6250 is one of the more accurate Micro-Ohmmeters available, with results within 0.05% accuracy.

Resistance measurements are automatically calculated and displayed, taking into account the measurement value, ambient temperature, reference temperature and metal temperature coefficient. Sample temperature can be manually entered by the operator or directly measured by the AEMC 6250 with an external RTD temperature probe.

The AEMC 6250 Micro-Ohmmeter is uniquely designed to conduct tests on both resistive and inductive material, with operator selection directly from the front
panel. Three test modes are available; resistive (instantaneous test), inductive (continuous test), and auto (repetitive test). Up to 1500 measurements can be stored and printed directly to a printer of from a PC.

The large, easy-to-read display shows the resistance measurement, ambient and reference temperatures, metal type and test method, as well as alarm conditions and memory utilization, all in real time. Previously stored test results can easily be called up for review on the display or sent directly to a printer or remote terminal.

Two programmable alarm set points are available. Each can be either active high or low and will sound an alarm when tripped, further adding to the ease of use by permitting quick Pass/Fail measurements.

External trigger operation is available through the communication port allowing the test to be conducted from a remote location.

The AEMC 6250 Micro-Ohmmeter (10A) will be a valuable asset for your bond testing, coil and contact testing as well as coatings and connector or any other low resistance testing application.

Also see the AEMC 5600 digital low resistance ohmmeter (DLRO)
The Good:


The Bad:


The Bottom Line:

Full Review

Three Test Modes:

Resistive materials (i.e. ground bonding, coatings, contact resistances) are tested with an instantaneous test. Simply press the test button – the reading is taken and the test is concluded.

Inductive materials (i.e. coils, transformers, motor windings) are tested with a continuous test. The test is started and stopped by the operator at the push of a button.

Auto test mode is designed for multiple test points on resistive and/or low inductance material. The test is started at the press of a button.  As the operator moves the probe from one point to another, the test is stopped, the results are displayed and a new test is started when the test probes again make contact – no need to press the test button!  Residual voltage is measured between tests to ensure proper results.  This test mode continues until the operator presses the button to conclude the testing.


Other Features:

  • Measures from 0.0001mΩ (0.1µΩ resolution) to 2500.0Ω
  • Test current selection of 1mA, 10mA, 100mA, 1A and 10A
  • RTD temperature probe to check tested sample (optional)
  • Selectable metal types
  • Automatic and manual temperature correction
  • EMF levels measured and eliminated in measurement
  • Two programmable alarm set points
  • Stores up to 1500 test results
  • Selectable Inductive and Resistance test modes
  • Automatic multiple test mode (multiple tests without pressing the button)
  • Large multi-line electroluminescent display
  • Local or remote test setup and control
  • Direct printout
  • Internal rechargeable batteries - conduct up to 5000 10A tests
  • Rugged, double insulated waterproof case
  • CE Mark


    • MODEL

     

     

     

    6250

     

     

     

     

    ELECTRICAL

     

     

     

     

     

     

     

     

    Range

    5.0000mΩ

    25.000mΩ

    250.00mΩ

    2500.0mΩ

    25.000Ω

    250.00Ω

    2500.0Ω

     

    Accuracy

    0.05% + 0.5µΩ

    0.05% + 3µΩ

    0.05% + 30µΩ

    0.05% + 0.3mΩ

    0.05% + 3mΩ

    0.05% + 30mΩ

    0.05% + 300mΩ

     

    Resolution

    0.1µΩ

    1µΩ

    10µΩ

    0.1mΩ

    1mΩ

    10mΩ

    100mΩ

     

    Test Current

    10A

    10A

    10A

    1A

    100mA

    10mA

    1mA

     

    Measurement Mode

    Selectable: Inductive (continuous test), Resistive (instantaneous test) or Auto (multiple tests)

    Metal Type

    Selectable: Copper, Aluminum or Other Metal

    Alpha

    Programmable from 000.00 to 99.99

    Temperature Correction

    Manual or Automatic with 0.1° resolution

    Reference Temperature

    Programmable from 32° to 130°F or -10° to 130°C

    Ambient Temperature

    Programmable from 32° to 130°F or -10° to 130°C

    Temperature Probe

    100Ω platinum RTD

    Resolution

    0.1°F (0.1°C)

    Accuracy

    ±0.9°F (±0.5°C)

    Alarms

    Two – programmable set points from 0.0 to 2500.0Ω

    Buzzer

    Programmable ON/OFF and volume level

    Power Source

    Rechargeable 6V, 8.5 Ah NiMH batteries;

    Battery Life

    Approximately 5000 10A tests

    Battery Charging

    120/240VAC ± 20% (45 to 400Hz) line voltage

    Power Management

    Display powers down after 1, 5 or 10 minutes of inactivity (operator selectable)

    Low Battery Indication

    is displayed when battery voltage is low

    Memory

    Stores up to 1500 test results

     

    Data in memory can be reviewed on the instrument display, on a PC or via direct printout

    MECHANICAL

     

    Dimensions

    10.63 x 9.84 x 7.09" (270 x 250 x 180mm)

    Weight

    8.1 lbs (3.69kg)

    Index of Protection

    IP53 (case open); IP64 (case closed)

    DISPLAY

     

    Display Type

    Large 50,000-count digital

    Size

    4 x 2.25" (102 x 57mm)

    Backlight

    Blue electroluminescent

    Color

    Safety yellow case; gray faceplate

    COMMUNICATION

     

    Interface Port

    PC, remote terminal, printer or trigger test from remote contact closure

    ENVIRONMENTAL

     

    Operating Temperature

    14° to 132°F (-10° to 55°C); 10 to 80% RH (non-condensing)

    Storage Temperature

    -40° to 140°F (-40° to 60°C)

    SAFETY

     

    Safety Rating

    EN 61010-1, 60V Cat. II

    Double Insulation

     

     

    Yes

     

    CE Mark

    Yes

    Product brochures

    AEMC 6250 Micro-Ohmmeter Product Datasheet

    Product manuals

    AEMC 6250 Users Manual
    No user reviews available.
    Recommended Accessories
    The AEMC 6250 Micro-Ohmmeter 10A has 11 recommended accessories.        Click to show all accessories


    Cases
    Name Price Quantity
    AEMC Bag – Extra Large Classic Tool Bag $44.00
    Cases
    Name Price Quantity
    AEMC Bag - Medium Tool Bag $29.95
    Miscellaneous
    Name Price Quantity
    AEMC Kelvin Probes 10 ft (1A, Spring Loaded) $99.00
    AEMC Kelvin Probes 20 ft (1A, Spring Loaded) $149.00
    AEMC RTD Temperature Probe w/7 ft Extension Cable $289.00
    AEMC Kelvin clips (10A - Hippo), 20 ft color-coded leads with spade lug terminations $229.00
    AEMC RTD Temperature Probe $169.00
    Unassigned
    Name Price Quantity
    AEMC Kelvin probes spring-loaded 20 ft. (10A) - Set of two $199.00
    AEMC Kelvin probes 10 ft. (1A) - Set of two $149.00
    AEMC Kelvin probes 10 ft (10A - Hippo) - Set of two $199.00
    AEMC Kelvin probes (1A, Spring Loaded) 10ft. - Set of two $189.95

    Have a Question?

    Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

    Name
    Email
    Phone
    Message
    In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

    Enter Passcode: