AEMC 5600 Digital Micro-Ohmmeter 10A

Sorry, this product is discontinued and is no longer available for purchase. Please call 1-877-766-5412 to find a suitable replacement.AEMC 6240 Micro-Ohmmeter 10A is a suggested replacement model.


The AEMC 5600 Digital Micro-Ohmmeter performs accurate, reliable low resistance measurements with test currents to 10A and resolution to 1mΩ. The front end of the AEMC 5600 employs a 4-wire Kelvin configuration, which eliminates test lead resistance providing a measurement accuracy of 0.25%. A reverse polarity switch
compensates for the effect of DC voltage interference on the accuracy and permits reading averaging. A built-in circuit filters against AC signals.

The large, easy-to-read LCD is 0.71" (18mm) high and directly displays resistance measurements in ohms with an automatic decimal point. The LCD also displays a 1 to indicate range overload, and "--" to show a reversed connection of the measurement leads. Power is supplied by a long-life NiCD battery with a built-in recharger (110/220V).

The AEMC 5600 features automatic shutoff after four minutes of non-use. Four LEDs on the front panel indicate measurement faults (open circuit, blown fuse, etc.), thermal protection, low battery and battery recharging. For operator safety and instrument protection, the AEMC 5600 is fuse protected at the inputs. Two fuses, accessible on the front panel, protect against stored energy in inductive loads. Enhanced internal circuitry gives protection against possible inductive kickback when the current is shut off. A built-in thermal switch prevents the micro-ohmmeter against overheating on the 10A range when in continuous use.

The AEMC 5600 Digital Micro-Ohmmeter is housed in a sealed, safety yellow field case with carrying handle and a lid that may be removed during testing if desired.

Applications:

  • Contact resistance of breakers and switches
  • Wire to terminal connections
  • Winding resistance of motors and transformers
  • Resistance on electric motors
  • Aircraft and rail bonds
  • Grounding connections
  • Battery strap measurements

For greater capabilities look at the AEMC 6250 Micro-Ohmeter

Supplies are limited, please call to check availability!

Toll Free: 1-877-766-5412

What's Included:

  • 110V battery
  • AC supply cord
  • And user manual
The Good:


The Bad:


The Bottom Line:

Full Review


  • Four terminal Kelvin resistance measurement
  • 10A test current
  • 0.25% basic accuracy
  • 1Ω resolution
  • Direct reading, easy to operate
  • Six selectable ranges
  • Reverse polarity switch
  • Overload and input fuse protection
  • Automatic decimal point and zero
  • Rechargeable NiCD battery (110/220V)
  • Rugged field case for industrial applications
  • CE Mark

ELECTRICAL

 

 

 

 

 

 

 

Range

 

2000Ω

20mΩ

200mΩ

2000mΩ

 

20Ω

200Ω

 

Display

1999

19.99

199.9

1999

19.99

199.9

 

Resolution

1Ω

10Ω

100Ω

1mΩ

10mΩ

100mΩ

 

Test Current

10A

1A

1A

100mA

10mA

10mA

 

Accuracy

0.25% typical 0.5% max 2cts

0.25% typical 0.5% max 1ct

0.25% typical 0.5% max 1ct

0.25% typical 0.5% max 1ct

0.25% typical 0.5% max 1ct

0.25% typical 0.5% max 1ct

 

Power Source

Rechargeable 6V, 7Ah NiCD battery; built-in 110V/220V (47 to 450Hz) charger;

 

automatic shutoff after 4 minutes non-use

Battery Life

200Ω range: 200 to 300 8-second measurements 20-200mΩ ranges: 900 30-second measurements (approx.) 2000mΩ, 20-200Ω ranges: 5000 30-second measurements (approx.)

Operating Voltage

4.5 to 7VDC

Recharge Time

14 hours from full discharge (approx.)

MECHANICAL

 

Display

2000-count, 7-segment LED

Connection

Terminals accept 4mm banana plugs or 6mm (min) spade lugs

Operating Temperature

14 to 131F (-10 to 55C)

Storage Temperature

-4 to 131F (-20 to 55C)

Dimensions

15.35 x 10.24 x 9.84" (390 x 260 x 250mm)

Weight

17 lbs 10 oz (8kg)

Case

Fiberglass-charged polycarbonate with handle and removable lid, watertight to IP534 (lid closed), IP520 (lid open)

Colors

Safety-yellow case, gray faceplate

SAFETY

 

Safety Ratings

Electrical: IEC 38, Supply voltage, Electromagnetic: IEC 801-2, Electrostatic discharge;

 

EN 61010, 300V, Cat. II, IEC 801-3, Electromagnetic fields; IEC 801-5, Electrical shocks,

 

Mechanical/environmental: IEC 529, Protection Index (IP); IEC 68.2.6, Vibration;

 

IEC 68.2.27, Shocks; IEC 68-2-29, Shake IEC 68.2.31, Knock over;

 

IEC 68.2.32, Drop test, Case Material: UL94

Overload Input Protection

380Vrms

Fuses

Two high-interrupting capacity 8A 380V, 11/4 x 1/4"

CE Mark

Yes

No user reviews available.

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: