Fluke i30 AC/DC Current Clamp

Usually ships within 1-2 weeks
FE I30

Price: $474.95

Request a Quote
Ask an Expert

The Fluke i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
The Good:

The Bad:

The Bottom Line:

Full Review

Electrical specifications
Current range

20 A ac rms or dc
Measuring range

30 A
Output sensitivity

100 mV/A
Accuracy (at +25 C)

1 % of reading 2 mA

1 mA
Load impedance

> 10 k Ohms and ≤ 100pF
Conductor position sensitivity

1 % relative to center reading
Frequency range

DC to 20 kHz (- 0.5 dB)
Temperature coefficient

0.01 % of reading/C
Power supply

9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)

300 V ac rms or dc
General Specifications
Maximum conductor size

19 mm diameter
Output connection

4 mm safety connector
Output zero

Manual adjust via thumbwheel
Cable length

1.5 meters
Operating temperature range

0 C to +50 C
Storage temperature range (with battery removed)

-20 C to +85 C
Operating humidity

15 % to 85 % (non-condensing)

250 g
Safety standards

BS EN 61010-1:2001

BS EN 61010-2-032:2002

BS EN 61010-031:2002

300 Vrms, Category III, Pollution Degree 2

Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
EMC Standards

EN 61326: 1998 +A1, A2, & A3
No user reviews available.

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: