Home » Electrical » Power Factor Meters » Druck DPI 610PC Pressure Calibrator with Pneumatic Pump, 300 PSIG
Druck DPI 610PC Pressure Calibrator with Pneumatic Pump, 300 PSIG
Part Number:
DK DPI610PC-300PSIG
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$3269.00 
USD (change)
USD (change) 
The
technically advanced GE Druck DPI 610 Pressure Calibrators are the
culmination of many years of field experience. This self-contained,
battery powered package contain a pressure
generator, fine pressure control, device energising (not IS version)
and output measurement capabilities, as well as facilities for 4 to 20
mA loop testing and data storage. The rugged weatherproof design
is styled such that the pressure pump can be operated and test leads
connected without compromising the visibility of the large dual
parameter display. The mA step and ramp outputs and a built-in
continuity tester extend the capabilities to include the commissioning
and maintenance of control loops.
A highly accurate and easy to use calibrator is only part of the solution for improving overall data quality and working efficiency. The DPI 610, with data storage and RS 232 interface, reduce calibration times and eliminate data recording errors.
At ±0.025%, they are accurate enough to calibrate your most critical field devices. Combine this high accuracy pressure calibrator with an integral hand pump and a loop calibrator to give you a comprehensive calibration tool.
The Druck DPI 610PC Pressure Calibrator is a pneumatic calibrator with ranges of -22 "Hg to 300 PSI with an internal pump that generates both pressure and vacuum.
Advanced Functions
Built-in test routines help you perform leak tests on pressurized systems, or test the performance of pressure switches. You can also perform both manual and automatic loop tests with programmed stepped or ramped mA. Built-in process functions let you store and recall min and max readings, and convert pressure measurements to flow rates or % of span.
Stores Procedures and Results
The 10,000-point memory lets you store calibration procedures and results, leak-test parameters, intermittent fault events, and more. Stored data can be viewed on the screen or exported to a PC
What's Included:
A highly accurate and easy to use calibrator is only part of the solution for improving overall data quality and working efficiency. The DPI 610, with data storage and RS 232 interface, reduce calibration times and eliminate data recording errors.
At ±0.025%, they are accurate enough to calibrate your most critical field devices. Combine this high accuracy pressure calibrator with an integral hand pump and a loop calibrator to give you a comprehensive calibration tool.
The Druck DPI 610PC Pressure Calibrator is a pneumatic calibrator with ranges of -22 "Hg to 300 PSI with an internal pump that generates both pressure and vacuum.
Advanced Functions
Built-in test routines help you perform leak tests on pressurized systems, or test the performance of pressure switches. You can also perform both manual and automatic loop tests with programmed stepped or ramped mA. Built-in process functions let you store and recall min and max readings, and convert pressure measurements to flow rates or % of span.
Stores Procedures and Results
The 10,000-point memory lets you store calibration procedures and results, leak-test parameters, intermittent fault events, and more. Stored data can be viewed on the screen or exported to a PC
What's Included:
- Test Leads
- Carrying Case
- Calibration Certificate
- Rechargeable Batteries
- Charger/Adapter
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- The dual parameter display shows INPUT and OUTPUT values in large clear digits. The P-I task configures the DPI610 to silmultaneously display the INPUT and OUTPUT current.
- Dual Display Pressure and mA
- Accuracy: 0.025% FS for all pressure ranges
- Ranges Available: -14.7 to 10,000 PSI including gage absolute & differential versions
- Integral pneumatic pressure/vacuum source: -22 in Hg to 300 PSI
- Pressure Source: 0 to 600 PIS
- Measure: Pressure, mA, V, Switch state (open/closed) and ambient temperature
- Source: Pressure, mA step, mA value
- Data Storage: 10,000 values
- Remote Pressure Sensors: up to 10 digitallly characterized sensors per calibrator
- Pressure Port: 1/8 NPT (Female)
- Release Valve: Vent and controlled release
- Volume Adjuster: Fine pressure adjustment
- Precision Volume Adjustment
- Sources and Reads 4-20 mA
- 24V Loop Power Supply
- Built-in Test Routines for Leak Tests and Switch Test
- 4 to 20 mA Loop Test Facility
- Battery Powered
ElectricalInputs: 50 VDC, 55 mA, -10 to +40°C
Accuracy: 0.05% rdg. ±0.004% FS, volts and mA; ±1°C, temp.
Resolution: 0.1 mV, 0.001 mA, 0.1°C
Voltage Outputs: 10 VDC ±0.1%, max. load 10 mA; 24 VDC ±5%, max. load 26 mA
Current Output: 0 to 24 mA
Accuracy: 0.05% rdg. ±0.1% FS
Resolution: 0.001 mA
Pressure
Ranges: Multiple ranges, gauge, absolute, differential, and vacuum
Accuracy: ±0.025% FS
Media Isolation: Gasses and fluids compatible with 316SS and Hastelloy
Media Dry, non-corrosive, non-conductive gasses compatible with 316
stainless steel, Hastelloy C276, BUNA-N and nylon
Pressure Port: 1/8" female NPT
General
Display: 2.36"-square graphic LCD with backlight
Operating Env.: -10 to +50°C, 0 to 90% RH
Power Supply: Six rechargeable C cells and charger/adapter, 110V
Size/Weight: 11.8 x 6.7 x 5.5" HWD (300 x 170 x 140 mm)/8 lbs (3 kg)
Display
Panel: 60 x 60 mm graphic LCD with backlight. (backlight not available on IS version)
Readout: ± 99999 capability, 2 readings per second.
Environmental
Temperature
Operating: -10° to 50°C
Calibrated: -10° to 40°C
Humidity: 0 to 90%, non-condensing.
Sealing: IP54.
Conformity: EN61010, EN50081-1, EN50082-1, CE marked.
Product brochures
No user reviews available.
