Altek 820 - Altek 820 Process Calibrator TechChek 820 on MyMeterStore.com

Lighten your load by taking the Altek 820 Process Calibrator TechChek to every site. It�s like bringing a cartload of test equipment from the shop to the control room or the field. The Altek 820 Process Calibrator TechChek 820 sources & reads DC like a milliamp or voltage calibrator, simulates and measures T/Cs & RTDs like a temperature calibrator and generates and counts frequency & Counts-Per-Minute like a frequency calibrator. Troubleshooting? It checks continuity and measures AC line voltage like a multimeter! The Process Calibrator TechChek 820 is easy to use. Select a function, choose a range, and turn the knob for the precise output you need. Plus, you can store three output values per range for instant recall with the �QUIK-CHEK� switch.

Use at every point in your 4 to 20 mA loop. You can Source & Read 0.00 to 24.00 mA, Simulate a Two-Wire Transmitter or the use the Process Calibrator TechChek 820 to simultaneously Power & Measure your Two-Wire Transmitters.

Calibrate all your DC millivolt and voltage instrumentation. Source from 0.00 to 110.00 mV and 0.00 to 10.25 V. Read up to 110.00 mV, 11.00 V and 200.0 VDC.

Source and read directly in �C and �F for T/C types J, K, T & E with 1� resolution. Cold junction compensation automatically adjusts for ambient temperature changes.

Built-in Platinum 100 Ohm DIN/IEC 751 table displays in �C or �F. No more decade box and hard-to-read tables. Also reads and sources in Ohms.

Generate Zero Crossing square waves from 1 to 1000 Hz, 0.01 to 10.00 kHz and from 1 to 1000 CPM (Counts-Per-Minute). Also measures as a frequency counter.

Check your line voltage or mains from 0.0 to 250.0 volts AC. Great for troubleshooting power problems.

Locate pairs of wire, open connections and shorts with the built-in beeper.

What's Included?

Six alkaline AA batteries
Deluxe case for bands free operation
Three year warrenty
Manufacturer's Statement of Calibration Practices
Universal test lead set
Shielded banana jacks and test leads
Alligator Clips
Test Probes
Spade Lugs
Operators Manual

More Information

See the Altek 820 Brochure