H8163 Series Enhanced Data Stream energy meters offer 26 points of
information about power system performance, pulse output of kWh data
and a phase-loss alarm.
The H8163 Energy Meters are easy to
install, making them ideal for all submetering applications. To acheive
system accuracy of 1%, from 2% to 100% of rated load, each meter is
factory matched with quick-to-install split-core CTs and calibrated as
a system.
Installing an Energy Meter is simple: just mount the meter, connect the neutral, and the three, colored voltage leads to the power conductors of the electrical service, and match the CTs (e.g., red voltage lead and red CT must be on the same conductor) to the voltage leads. Since the meter automatically detects and compensates for phase reversal, the concern of CT load orientation is liminated and installation time is greatly reduced.
To provide excellent total system accuracies of 1% from 2% to 100% of the rating of the CTs (e.g., 2-100 amps with 100 amp CTs), each meter is factory matched with quick to install split-core CTs. The meter/CTs are system calibrated.
The ultimate stand-alone energy metering system High resolution backlit LCD display provides clear readings at a distance and under any lighting conditions reduces the risk of misinterpretation of the data. Back lighting can be disabled if desired
Easy integration to control or data acquisition systems
H8163 provides a pulse output from 1/10 to 1 pulse per kWh provides easy connection to existing control systems
H8163 provides a phase loss alarm - protects equipment
With the optional Communications Board ( H8163-CB) Energy Meters ( H8150 & H8163) can easily be added to a Modbus® control systems network to report multiple variables including kW, kWh, kVAR, PF, Amps and Volts, providing crucial power information at a reduced installation cost
Simple, fast installation
Split-core CTs eliminate the need to remove electrical conductors, greatly reducing installation time
Energy Meters automatically detect and correct phase reversal, eliminating the need to be concerned with CT load orientation
CTs and voltage leads are color coded making it easy to determine correct connection
Optional communications information allow the meter to be connected to control system networks to report crucial power information at a much reduced installed cost.
APPLICATIONS
Commercial tenant submetering
Performance contracting
Cost allocation
Real-time power monitoring via local display or through control/data acquisition systems
See the Veris H8163 Brochure
