Want to get the Misers installed real fast, without the need to move the machine or install the sensors on the wall? Check out this EZ Install Model. Just attach the bracket, plug in the vending machine to the Miser and the Miser to the wall plug and you are finished! 5 minute installations are common with the EZ Install bracket.
Includes CoolerMiser slave unit CM151 unit and E-Z install bracket.For more product information please see the CoolerMiser master unit CM150.
CoolerMiser™ offers you...
A quick, inexpensive solution for energy savings
Environmental benefits
Early ROI
Longer machine lifespan
Capability to control single-, double- or triple-door coolers
Power sense that's as cool as it gets...
Compatible with all glass-front
coolers that contain non-perishable goods, CoolerMiser's Passive
Infrared Sensor (PIR) powers down the machine when the surrounding area
is vacant.
CoolerMiser's Inside intelligence...
Monitors the room's temperature
Periodically re-powers the cooling system
Ensures that the product stays cold
Behavior you can trust...
CoolerMiser™ analyzes the cooler's
performance on a cycle-by-cycle basis, constantly responding to changes
in load, sales and environment. It then modifies its behavior
accordingly, ensuring proper operation and temperature controls.
This Miser runs the bank...
For a bank of coolers, CoolerMiser™
can use its embedded Sensor Repeater, which allows it to be controlled
from the PIR sensor of any other Miser in the bank.
Ups and downs...
CoolerMiser's™ electrical current
sensor eliminates compressor short cycling - it will never power down
the machine while the compressor is running.
And when the machine is powered up,
the cooling cycle is allowed to finish before again powering down,
reducing the wear and tear on your machines...and prolonging your
profitability per unit.
Energize your savings and conservation...
CoolerMiser™ can save an average of
$100 per year, per cooler in energy costs. In addition, one
CoolerMiser™ reduces greenhouse gas emissions by 1,600 lbs of CO2 and
2,740 grams of NOx each year*.
* Based
on occupancy and the Energy Information Administration's national
average of greenhouse gas emissions and electricity generation.
CoolerMiser Technical Specifications
Electrical Specifications
Input Voltage: 115 Volts
Input Frequency: 50/60 Hz
Maximum Load: 12 Amps (Steady-State)
Power Consumption: Less than 1 Watt (Stanby)
Environmental Specifications
Operating Temp: 15 degrees C to 75 degrees C
Relative Humidity: 95% Maximum (Non-condensing)
Compatibility
Slide Coolers: Any cooler, except those containing perishable goods, which do not exceed 12 AMP nameplate rating.
Inactivity Timeouts
Occupancy Timeout: 15 minutes
Auto Re-power: One to seven hours, dynamically adjusted, based on cooler performance and ambient temperature
Product brochures
Product manuals
No user reviews available.
