The pocket-sized voltage detector
The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
A must for safe practices around electricity.
- Voltbeat™ technology and continuous self-test — so you always know it’s working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
| Operating principle |
|
Senses the steady state electrostatic
field produced by ac
voltage through insulation
without requiring contact to the
bare conductor. A red glow at
the tip and a beeping noise (if
not switched OFF) indicates the
presence of voltage. | |
| Voltage sensing ranges |
|
Nominally, 90 V AC to 1000 V
AC or 200 V AC to 1000 V AC
depending on model, 45 Hz to
405 Hz; also a 20 V to 90 V
control circuit model |
|
| Detector tip style |
|
Blade or round, depending
on model |
|
| Light source |
|
One high intensity red LED |
|
| Agency Approvals |
|
c CSA us, CE, TUV, C-Tick |
|
| Safety Rating | |
| IP Rating | |
| Operating Temperature | |
| Operating humidity ranges |
| 0 % to 95 % |
(0 °C to 30 °C) |
| 0 % to 75 % |
(30 °C to 40 °C) |
| 0 % to 45 % |
(40 °C to 55 °C) |
|
| Operating Altitude | |
| Batteries |
|
2 AAA alkaline batteries
included | |
Product training
Safety
Technical training
Troubleshooting hints & tips
Product manuals
No user reviews available.
