Home » Electrical » Power Factor Meters » AEMC 1045 1000V Megohmmeter Kit
AEMC 1045 1000V Megohmmeter Kit
Part Number:
AEMC 1045 Kit
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$949.00 
USD (change)
USD (change) 
The AEMC 1045 1000V Megohmmeter is a battery powered digital insulation resistance tester. It is designed to measure insulation resistance,
continuity, voltage and to measure resistance. The AEMC 1045 tests are
250, 500 and 1000V. It incorporates a 600V voltmeter which
automatically detects and accurately displays AC/DC voltages in the
test circuit on each of the insulation test voltage ranges. Above 25V
it also provides and audible an visual signal, and inhibits further
tests, thus protecting the user and the meter.
An exceptionally large digital/analog multi-function display provides clear and easy readings enhanced by a bright blue electroluminscent backlight. The AEMC 1045 incorporates a timer function which allows the user to operate the unit hands free for the duration of the test or until the button is pressed again. The megohmmeter will beep automatically at 30sec, 60sec and 10 minutes to remind the user to record measurements.
The AEMC 1045 Megohmmeter Kit includes a Model 1045 megohmmeter, field case, two color-coded leads, black test probe, two alligator clips, remote test probe, batteries and user manual. The Remote Test Probe (with target light) is used for all measurements. The yellow button on the probe button is used the same way as the button on the instruments. The test voltage is generated when the button is pushed.
Applications:
What's Included:
An exceptionally large digital/analog multi-function display provides clear and easy readings enhanced by a bright blue electroluminscent backlight. The AEMC 1045 incorporates a timer function which allows the user to operate the unit hands free for the duration of the test or until the button is pressed again. The megohmmeter will beep automatically at 30sec, 60sec and 10 minutes to remind the user to record measurements.
The AEMC 1045 Megohmmeter Kit includes a Model 1045 megohmmeter, field case, two color-coded leads, black test probe, two alligator clips, remote test probe, batteries and user manual. The Remote Test Probe (with target light) is used for all measurements. The yellow button on the probe button is used the same way as the button on the instruments. The test voltage is generated when the button is pushed.
Applications:
- Motor insulation resistance measurements
- Continuity checks
- Low resistance measurement
- Test industrial commercial wiring & motor control centers
- Test motors (AC & DC)
- Test transformers
- Dielectric Absorption Ratio and Polarization Index measurements
What's Included:
- AEMC 1045 1000V Megohmmeter
- Field case
- Two color-coded leads
- Black test probe
- Two alligator clips
- Remote test probe
- Batteries
- User manual
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- True Megohmmeter®
- Test voltage combinations of 250V, 500V and 1000V
- Insulation measurements to 2000MΩ (2GΩ)
- Automatic test inhibition if >25V
- Automatic discharge for operator safety
- Resistance measurements to 400kΩ
- Continuity measurements with 200mA test current
- Alarm indication
- Timer function for easy DAR and PI measurements
- Over-molded slip-proof holster for rugged field use
Product brochures
No user reviews available.
