Home » Electrical » Power Factor Meters » AEMC 1026 1000V Megohmmeter
AEMC 1026 1000V Megohmmeter
Yes! Available up to 
USD 
Shipping Information:
Arrives:
May 29
Arrives:
Arrives:
The AEMC 1026 Megohmmeter also features a continuity test range with audible beeper for resistances under 40Ω, and a 600VAC range for safety voltage check. In addition, the AEMC 1026 has an ohmmeter to measure from 0.1Ω to 4000Ω.
The press-to-test button has an associated locking feature for continuous tests up to three minutes, eliminating the need to manually hold down the button.
Other features include: a large 3-1/2 digit LCD for easy viewing; the data hold button retains the value on the display when pressed to facilitate correct recording of information, and a low battery indicator appears on the LCD when it is necessary to change batteries. This lightweight, easy-to-use megohmmeter can be used for
most commonly performed insulation tests, such as on cables, switch gear, motors, DC generators, power tools and small appliances.
Applications:
- Test insulation on cables, transformers, motors, insulators and wiring installations
- High resistance or absorption tests
- Spot reading tests
- Timed resistance measurements
- Dielectric (DAR) and polarization (PI) tests
- Low insulation test range for testing old or flooded installations
- Motor insulation resistance measurements
- Continuity checks and low resistance measurements
- Computer controlled production line testing
- Predictive maintenance by storing results in PC for trend analysis
What's Included:
- Set of leads with black and red alligator clips
- Batteries
- Soft carrying case
- And user manual
The Bad:
The Bottom Line:
Full Review
- Test voltage combinations of 250V, 500V and 1000V
- Insulation measurements to 4000MΩ
- Resistance measurement to 4000Ω
- Continuity test
- Continuity beeper
- 600VAC/DC test voltage range
- Large, easy-to-read display
- Data hold switch
- Test button may be locked-on for three minutes for hands-free operation
- Automatic discharge when test button is released
- Low battery indication
- Supplied with a soft carrying case and test leads
|
MODEL |
1026 |
||||
|
ELECTRICAL |
|||||
|
INSULATION
TESTS |
|||||
|
Test Voltage |
250V |
1kΩ to 4000MΩ |
|||
|
|
500V |
1kΩ to 4000MΩ |
|||
|
|
1000V |
1kΩ to 4000MΩ |
|||
|
Accuracy
|
< 2000MΩ |
±3% of Reading ± 5cts |
|||
|
|
> 2000MΩ |
±5% of Reading ± 5cts |
|||
|
RESISTANCE
TESTS |
|
||||
|
|
400Ω to 4000Ω |
||||
|
Accuracy*
|
±1% of Reading ± 5cts |
||||
|
CONTINUITY
TESTS |
|
||||
|
Beeper
Activation |
Displays Ω and beeps below 40Ω |
||||
|
Overload
Protection |
600Vrms |
||||
|
VOLTAGE
TESTS |
|
||||
|
|
0 to 600VAC/DC |
||||
|
Resolution
|
0.1V |
||||
|
Accuracy*
|
AC |
±1.5% of Reading ± 5cts |
|||
|
|
DC |
±1% of Reading ± 3cts |
|||
|
DISPLAY |
|
|
|||
|
Digital
Display |
|
3 x 1.7" (76 x 42mm) (LCD
panel with 40-segments analog bar indication) |
|||
|
GENERAL |
|
|
|||
|
Overrange
Indication |
|
“OL” will be shown on the LCD
Panel when out of range measurement is made |
|||
|
Low |
The |
will be
shown when the batteries need to be changed |
|||
|
Sampling
Rate |
2.5 times/sec digital display; 10
times/sec bar graph |
||||
|
Power
Source |
8 x 1.5V AA batteries |
||||
|
Dimensions
|
7.72 x 4.41 x 2.52" (196 x
112 x 64mm) |
||||
|
Weight |
1.5 lbs (700g) |
||||
|
|
Operating: 32° to 104°F (0° to
40°C), below 80% RH; Storage: 14° to 140°F (-10° to 60°C) |
||||
|
SAFETY |
|
||||
|
Safety
Rating |
EN 61010,
600V, Cat. III, Pollution Degree 2, Altitude up to 6000 ft (2000m),
EN50081-1; EN50082-1 |
||||
|
CE Mark |
Yes |
||||
|
*Accuracies
are at 23°C ± |
|||||
