Fluke 124 Industrial ScopeMeter

Usually ships within 1-2 weeks
FE 124/003
Datasheet  |  Manual

Price: $1,899.95

Recommended Options
Add Fluke C125 Soft Meter Case for Fluke Multimeters+$39.95
Add Fluke TL71 Premum DMM Test Lead Set+$24.95
Add Fluke TL220 Suregrip Industrial Test Lead Set +$74.95
Add Fluke C101 Hard Carrying Case+$64.95
Add Fluke TL223 Suregrip Electrical Test Lead Set+$74.95

Quantity
Request a Quote
Ask an Expert



Three-in-one simplicity for fast answers wherever you work.

In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The Fluke 124 ScopeMeter meet today’s need of simultaneously measuring and checking waveforms.

For industrial, electronic or electro mechanical applications, the compact Fluke 124 Industrial ScopeMeter is the rugged solution for industrial troubleshooting and installation applications. It features 40MHz bandwidth, Connect-and-View  triggering automatically displays stable waveforms of virtually any signal and a dual DMM and a paperless recorder to get virtually any job done. 

It is a truly integrated test tool in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.

  • Dual-input 40 MHz digital oscilloscope.
  • Two 5,000-count true-rms digital multimeters.
  • 20 save setups and screens
  • Cursor measurements
  • A dual-input TrendPlot recorder.
  • Connect-and-View trigger simplicity for hands-off operation.
  • Shielded test leads for oscilloscope, resistance, continuity and capacitance measurements.
  • Up to seven hours battery operation with standard battery
  • CAT III 600 V safety certified.
  • Optically isolated RS-232 interface.
  • Rugged compact case.

Software comes with the Fluke 124S ScopeMeter
Other models are the Fluke 123; Fluke 123S
What's Included:

  • Fluke AC120 Alligator clips
  • Fluke BB120 Shielded BNC adapter
  • Fluke VPS40 Voltage Probe, 40 MHz, 10:1
  • Getting started booklet
  • Fluke HC120 Hook Clips
  • Fluke PM8907 Battery Charger/Line Voltage Adapter
  • Fluke STL120 Shielded Test Lead Set
  • Fluke BP120 MH
  • User manual (CD-ROM)

The Good:


The Bad:


The Bottom Line:

Full Review

A three-in-one tool

Dual-input measurement shows both meter reading and waveform at the same time today’s need of simultaneously
ScopeMeter 124 combines a 40 MHz dual input digital storage oscilloscope, two true-rms digital multimeters and a dual input TrendPlot recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 124 is the only tool you’ll need

One test lead measures all

Check the starting capacitor of a motor using the ScopeMeter 123
High frequency waveform-, meter-, capacitance- and resistance-measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.

The confidence to do a better job

Open the measure menu and select from 26 scope- and meter-measurements
Working under time pressure and in cramped or difficult to reach locations means you want to focus on the job at hand, not on the test tool in your hand. Which is why the ScopeMeter 124 has  Connect-and-View automatic triggering.You don’t have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.

Battery powered mobility
Up to seven hours of battery operation frees you from mains outlets for true on-the- move working. The handheld format and the weight of just 1.2 kg, make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments.

Floating measurements, safety certified
While conventional oscilloscopes can only make measurements referenced to power line ground, the Fluke 124 ScopeMeter make floating measurements so there is no risk of an accidental ground short circuit when making a connection. The ScopeMeter 124  and the included shielded test leads are safety certified for measurements on CAT III 600 V  industrial power systems. And using the VPS40 probe (included with this model), measurements up to CAT II 1000 V  re fully supported! Via the optically isolated RS-232 or OC4USB interface, the ScopeMeter 124 can be safely connected to a printer for direct print-out or to a PC for later analysis and documentation using FlukeView software.

Connect-and-View™ triggering for an instant, stable display

Connect-and-View captures even the most complex motor drive signals
Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke’s unique Connect-and-View recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal - including motor drive and control signals - without you touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test points in quick succession.

Use TrendPlot™ to help find intermittents, fast

Cursors and zoom help you analyze the captured TrendPlot
The toughest faults to find are those that happen only once in a while: intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You may not be around to see it — your Fluke ScopeMeter will. In this “paperless recorder” mode, you can plot the minimum and maximum peak values and average over time – up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase - with time and date stamp -to help lead you to the cause of those faults quickly.
Software comes with the Fluke 124S ScopeMeter with SCC120 kit helps you get more out of your ScopeMeter by:

  • Documenting: Transfer screens, waveforms, and measurement data from the ScopeMeter to your PC for printing, or to import data to other programs.
  • Archiving: Store and retrieve waveforms with text annotations and create your own library for easy reference and comparison.
  • Analysis: Gather valuable measurement data and enable cursor measurements to reveal relationships and conditions. Extended recording of up to four user-selected measurements help you monitor and analyze slow moving signals and related events. Upload waveforms to the PC and use cursors for detailed measurements. Perform waveform analysis, including analyzing harmonics.
No user reviews available.
Recommended Accessories

Adapters
Cases
Cases
Communications
Current Probes
Fiber Optics
Name Price Quantity
Fluke FOM - Fiber Optic Meter $499.95
Lighting
Name Price Quantity
Fluke L200 Probe Light $24.95
Maintenance
Miscellaneous
Mounting
Name Price Quantity
Fluke H900 Test Lead Holder $22.45
Power
Pressure Modules
Name Price Quantity
Fluke PV350 Pressure Vacuum Module $449.95
Software
Temperature
Test Leads
Name Price Quantity
Fluke TL71 Premum DMM Test Lead Set $24.95
Fluke TL220 Suregrip Industrial Test Lead Set $74.95
Fluke TLK287 Electronics Master Test Lead Set $149.95
Fluke TL224 SureGrip Silicone Insulated Test Leads $24.95
Fluke BB120 Shielded Banana to Female BNC Adapter $39.95
Fluke TL223 Suregrip Electrical Test Lead Set $74.95
Fluke TL81A Deluxe Electronic Test Lead Set $139.95
Fluke TL76 All-in-one Test Lead Set $29.95
Fluke TP920 Test Probe Adapter Kit $34.95
Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit $109.95
Fluke TL910 Electronic Test Probe Set $64.95
Fluke STL120 Shielded Test Leads $105.48
Fluke TL221 Suregrip Silicone Test Lead Extension Kit $24.95
Fluke TL80A Basic Electronic Test Lead Set $69.95
Fluke BP980 Double Banana Plug Kit $39.95
Fluke VPS121 1:1 Voltage Probe Set $182.00
Fluke VPS201 100:1 Voltage Probe Set $358.00
Fluke VPS40 10:1 Voltage Probe with 2 mm tip 40 MHz $118.67
Fluke TL40 Retractable Tip Test Lead Set $42.45
Fluke SCC128 Automotive Troubleshooting kit (120 Series) $799.95
Fluke HC200 Hook Clip set 2 red, 2 gray $42.45
Fluke PM8918/301 ScopeMeter Low Pass Filter Probe $180.00
Fluke AC120 Alligator Clips $34.95
Fluke PM9090/001 Probe Industrial Pin Grabber Flexible Clip $44.00
Fluke TP912 Replacement Tips for TL910 $27.45
Fluke DP120 Differential Probe $649.95
Fluke STL90 Shielded Test Lead Set $224.95
Fluke PM9092/001 50 Ohm Coaxial BNC cable set $84.95
Fluke VPS250 2.5 m Voltage Probe Set 75 MHz $123.99
Fluke L210 Probe Light Kit $39.95
Fluke ITP120 Optically Isolated External Trigger Probe $374.95
Fluke TL238 Test Lead Set for High Energy Environment $74.95
Fluke HC120 Hook Clips $44.95

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: