Home » Fluke 717-100G Pressure Calibrator

Fluke 717-100G Pressure Calibrator

Fluke 717-100G Pressure Calibrator
View Images
Usually ships within 1-2 weeks
FE 717-100G
Datasheet  |  Manual

Price: $1,299.95

Recommended Options
Add Fluke C25 Large Soft Case: +$34.95
Add Fluke C125 Soft Meter Case for Fluke Multimeters: +$39.95
Add Fluke TL71 Premum DMM Test Lead Set: +$23.95
Add Fluke TL220 Suregrip Industrial Test Lead Set : +$69.95
Add Fluke C101 Hard Carrying Case: +$59.95

Quantity
Request a Quote
Ask an Expert



Compact and professional pressure calibration tools.

Fluke 717-100G Pressure Calibrator is a compact, lightweight and easy to carry calibrator that delivers outstanding performance, durability and reliability.  The Fluke 717 Calibrator is EMI tolerant, dust and splash resistant and features a removable battery door for quick battery changes.

The Fluke 717 simultaneously measures pressure and mA and delivers 24 volt loop supply while measuring mA.

This new Pressure Calibrator presents cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures.  Connect it with any of the Fluke pressure modules to address a wide variety of gage, differential, absolute, vacuum and dual (compound) pressure applications.

Measure:

  • Temperature from Thermocouple output
  • Loop Current
  • Pressure, 0.05% of full scale
  • Temperature from RTD output
  • Pressure to 10,000 psi/69 mPa using one of 29 Fluke pressure modules
  • Pressure, 0.05% of full scale with internal 100 psig sensor
The Good:


The Bad:


The Bottom Line:

Full Review


  • Measure pressure, 0.05% of full scale with internal sensor up to 5000 PSI/345 bar sensor (5000G model)
  • Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24V loop power
  • Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
  • 1/8 NPT female pressure fitting
  • Compatible with non-corrosive Gases and liquids
  • Select eleven different engineering units
  • Zero, min, max, and hold functions
  • Calibrate P/I instruments with simultaneous pressure and current measurement
  • Pressure switch test function captures set, reset and Deadband values of a pressure switch
  • Error% calculation of mA measurements for quick pass-fail decisions
  • Long lasting battery life
  • Holster features test lead storage
  • Compatible with Toolpack magnetic hanging system
  • New switch test
Measurement Accuracy
Pressure
717 Series
Measure Pressure (internal sensor)
Accuracy: 0.05% full scale
Functions: Zero, Min, Max, Hold, Damp

 Note Gasses / liquids (non-corrosive)
 
Fluke 717 100G
Range: -12 to 100 PSI, (-850 mbar to 7 bar, -83 to 689.48 kPa)
Resolution: 0.01 psi, 0.1 mbar, 0.01 kPa
Over Pressure: 2 X full scale
 
Fluke 717 Series with Pressure Modules
Measure Pressure (via pressure module connector using optional Pressure Modules)
Range: 29 pressure modules, 0-1 inH20 to 10,000 PSI, 2.5 mbar to 700 bar ranges. Over pressure per pressure module specs
Resolution: Per pressure module specs
Accuracy: per pressure module specs
Functions: Zero, Min, Max, Hold, Damp
Current
Range: 0 to 24 mA (-25% to 125%)
Resolution: 0.001 mA
Accuracy: 0.015% + 2 counts

Specifications
Loop Power
Range: 24 V dc
Accuracy: +/- 10%

 Note: Drive; 20 mA into 1000 ohms for battery >6.8V; 700 W for battery 5.8 to 6.8 V
Display

 Clear 5 digit LCD

Environmental Specifications
Operating Temperature

-10 șC to 55 șC
Storage Temperature

-40 șC to 60 șC
Humidity (Without Condensation)

95% (10 șC to 30 șC)

75% (30 șC to 40 șC)

 45% (40 șC to 50 șC)

 35% (50 șC to 55 șC)
Operating Altitude

 3,000 M max

Safety Specifications
Safety

 CSA C22.2 No. 1010.1:1992

Mechanical & General Specifications
Size

 201 mm L x 98 mm W x 52 mm (7.93in. L x 3.86in. W X 2.06in.)
Weight

22 oz, approximately 600G with holster
Warranty

 3 years
Shock & Vibration

 Random, 2G, 5-500 Hz

 1m drop test
Battery type

 Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline

Product brochures

Fluke 717 and 718 Pressure Calibrator Datasheet

Product training

Fluke Pressure Calibration with the Fluke 718 - New Design Protects On-Board Pump from Fluid Damage Application Note

Technical training

Fluke 718 Pressure Calibrators & Fluke 718 Calibrator Pump Technical Datasheet
Fluke Calibrators for Pressure Calibration Application Note
Fluke Process Calibrators - Education Goes Full Circle - Upgrading Refinery Instrumentation Application Note

Troubleshooting hints & tips

Fluke Pressure Calibrators with the Fluke 718 - New Design Protects On-board Pump from Fluid Damage Application Note

Product manuals

FE 717 Instruction Sheet
Fluke 717 Instruction Sheet
No user reviews available.
Recommended Accessories

Cases
Name Price Quantity
Fluke C101 Hard Carrying Case $59.95
Fluke C800 Hard Meter and Accessory Case $49.95
Cases
Name Price Quantity
Fluke H80M Protective Holster with Magnetic Hanging Strap $42.45
Cases
Name Price Quantity
Fluke C25 Large Soft Case $34.95
Fluke C125 Soft Meter Case for Fluke Multimeters $39.95
Pressure Modules
Name Price Quantity
Fluke 700P07 Gage Pressure Module (500 psi) $1,299.95
Fluke 700P08 Gage Pressure Module (1000 psi) $1,299.95
Fluke 700P05 Gage Pressure Module (30 psi) $1,299.95
Fluke 700P09 Gage Pressure Module (1500 psi) $1,299.95
Fluke 700P04 Differential Pressure Module (15 psi) $1,299.95
Fluke 700P06 Gage Pressure Module (100 psi) $1,299.95
Fluke 700PCK Pressure Calibration Kit $1,049.95
Fluke 700PRV-1 Pressure Relief Valve Kit $674.95
Fluke 700P29 Gage Pressure Module (3000 psi) $2,099.95
Fluke 700P30 Gage Pressure Module (5000 psi) $2,099.95
Fluke 700P24 Differential Pressure Module Wet (15 psi) $1,299.95
Fluke 700PA4 Absolute Pressure Module (15 psi) $1,499.95
Fluke 700PV3 Vacuum Pressure Module (-5 psi) $1,499.95
Fluke 700PA6 Absolute Pressure Module (100 psi) $1,499.95
Fluke 700PD5 Dual Pressure Module (-15/30 psi) $1,499.95
Fluke 700PD6 Dual Pressure Module (-15/100 psi) $1,499.95
Fluke 700P27 Gage Pressure Module (300 psi) $1,299.95
Fluke 700PA3 Absolute Pressure Module (5 psi) $1,499.95
Fluke 700PD2 Dual Pressure Module (±1 psi) $1,499.95
Fluke 700PD7 Dual Pressure Module (-15/200 psi) $1,499.95
Fluke 700PV4 Vacuum Pressure Module (-15 psi) $1,499.95
Fluke 700P00 Differential Pressure Module (1 in. H2O) $1,699.95
Fluke 700P02 Differential Pressure Module (1 psi) $1,299.95
Fluke 700PD4 Dual Pressure Module (±15 psi) $1,499.95
Fluke 700P01 Differential Pressure Module (10 in. H2O) $1,299.95
Fluke 700P22 Differential Pressure Module Wet (1 psi) $1,299.95
Fluke 700P23 Differential Pressure Module Wet (5 psi) $1,299.95
Fluke 700PA5 Absolute Pressure Module (30 psi) $1,499.95
Fluke 700PD3 Dual Pressure Module (±5 psi) $1,499.95
Fluke 700P31 Gage Pressure Module (10000 psi) $2,099.95
Fluke PV350 Pressure Vacuum Module $424.95
Fluke 700P03 Differential Pressure Module (5 psi) $1,299.95
Process Tools
Name Price Quantity
Fluke 700HTP-1 Hydraulic Test Pump $959.95
Fluke 700LTP Low-pressure Test Pump $724.95
Fluke 700PMP Pressure Pump $449.95
Temperature
Name Price Quantity
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe $279.95
Test Leads
Name Price Quantity
Fluke TL71 Premum DMM Test Lead Set $23.95
Fluke TL220 Suregrip Industrial Test Lead Set $69.95
Fluke TLK287 Electronics Master Test Lead Set $139.95
Fluke TL223 Suregrip Electrical Test Lead Set $69.95
Fluke TL81A Deluxe Electronic Test Lead Set $134.95
Fluke TL76 All-in-one Test Lead Set $29.95
Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit $99.95
Fluke TL80A Basic Electronic Test Lead Set $64.95
Fluke TL238 Test Lead Set for High Energy Environment $69.95

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: