Home » Electrical » Power Factor Meters » Fluke 753 Documenting Process Calibrator

Fluke 753 Documenting Process Calibrator

Fluke 753 Documenting Process Calibrator
  • Measures 300V AC/DC
  • Increased accuracy, reliability & battery life than the Fluke 743

Part Number:
FE 753
In Stock?
Yes! Available up to 1 units

Quantity

Price:
$4995.00 USD (change)

 

Terms & Conditions
Shipping Information:

Ships in 1 - 4 Days
Arrives:
May 23-
May 29
Max of 1 units
$62.50
Fast: Ships today*
Arrives:
May 22
Max of 1 units
$87.50
Fastest: Overnight
Arrives:
May 21
Max of 1 units
$115.00

New! Fluke 753

You’re going to love what we’ve done with your calibrator.

The Fluke 753 is everything you needed and wished for in the 743B and more!

The 753 does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You'll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package.

For documentation, the 753 automates calibration procedures and captures your data.

And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.

Fluke 753 Features

Work smarter. Work faster.

The 753 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis.

  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results.
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
  • Easy to use
  • Three year warranty
  • Bright white dual display. Read both sourced and measured parameters simultaneously.
  • Multi lingual interface
  • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
  • Delivered with DPC/Track Sample software.
  • Compatible with many Asset Management software packages.

 

The Good:


The Bad:


The Bottom Line:

Full Review

Pressure Modules

Covers virtually any pressure application including gauge, differential, dual (compound), absolute, and vacuum.

  • Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.
  • Rugged urethane molded cases protect the modules from rough handling and harsh conditions.
  • Features internal temperature compensation from 0º to 50º C for full accuracy performance.
  • Includes NIST-traceable calibration certificate.
  • Modules can be calibrated locally, helping to control costs.
A family of 29 optional pressure modules provides pressure calibration and measurement capabilities. Twenty-eight modules are available, with basic accuracy specs to 0.05%. Ranges start at 0 — 1 in H20 (0 — .25kPa) and go to 0 — 10,000 psi (0 — 70,000 kPa). Additional information about pressure modules is available on the Pressure Modules Home Page.

Automated Procedures

Allow you to quickly set up powerful, automated calibration procedures for linear transmitters, DP flow transmitters, and one- and two-point limit switches. Simply select the appropriate measure and/or source functions and fill out the procedure template. The 750 Series does the rest. It quickly performs the test, calculates the errors, and displays the final results, highlighting out of tolerance points.

Custom Units

Enable you to map one unit to another, such as mV to ºC or ºF. Allows you to use the Fluke 750 Series with millivolt output accessories such as the Fluke 80T-IR Temperature Probe, and to document tests using non-supported units such as parts per million or revolutions per minute.

User-entered Values

Enables technicians to record calibration results that were sourced and/or measured by other devices such as panel meters or readout-only devices.

Limit Switch Calibration

Procedures perform fast, automated calibration of one and two-point limit switches for voltage, current, temperature, and pressure.

Differential Pressure Flow Instrument Calibration

Routines use a square root function to directly calibrate DP flow instruments.

Additional Features

Multifunctional
Calibrate temperature, pressure, voltage, current, resistance, and frequency. Since it both measures and sources, you can troubleshoot and calibrate all with one rugged tool.

Powerful, yet easy to use
The easy-to-follow menu-driven display guides you through any task. Get up to speed in minutes, not days. Programmable calibration routines enable you to create and run automated as-found/as-left procedures to ensure fast, consistent, calibrations.

Records and documents results
To support your ISO-9000 or regulatory standards the Fluke 754 captures your calibration results, eliminating the need to juggle a pen and pad in the field. The USB interface lets you transfer the results to a PC, thus saving the time of having to manually transcribe them when you return to the shop.

Truly hand-held
Small enough to fit easily into a tool bag and to use in tight spaces. Runs an entire shift on a rechargeable Li-ion battery pack.

Rugged and reliable
Count on Fluke's rugged design to deliver top accuracy and reliability in harsh environments. Overmolded urethane case stands up to rough handling in industrial environments.

Bright white display
Lets you read your results in any kind of light. Backlight has three (3) settings.

Soft keys
Provide one-touch access to enhanced functions such as task lists, automated procedures, scaling, min/max, stepping and ramping, and review memory.

Three operating modes
Measure, Source, or simultaneous Measure/Source, - enable technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.

Multi-lingual interface
Displays instructions in English, French, German, Spanish, and Italian.

Built-in algebraic calculator
With four functions-plus square root-stores, recalls, and performs calculations required for setting up instruments or evaluating data in the field. Use it to set the source function to a calculated value. There's no need to carry a pencil and paper or a separate calculator.

Programmable measurement delay
Inside automated procedures permits calibrating instruments that respond slowly.
Measurement Accuracy

Resolution
1 Year
2 Years
Voltage DC

100.000 mV
3.00000 V
30.0000 V
300.00 V


0.02% + 0.005 mV
0.02% + 0.00005V
0.02% + 0.0005 V
0.05% + 0.05 V		0.03% + 0.005 mV
0.03% + 0.00005 V
0.03% + 0.0005 V
0.07% + 0.05 V
Voltage AC
Range
40 to 500 Hz
3.000 V
30.00 V
300.0 V
0.001 V
0.01 V
0.1 V
0.5% + 0.002 V
0.5% + 0.02 V
0.5% + 0.2 V
1.0% + 0.004 V
1.0% + 0.04 V
1.0% + 0.2 V


Current DC
30.000 mA
110.00 mA

0.01% + 5 uA
0.01% + 20 uA
0.015% + 7 uA
0.015% + 30 uA
Resistance
10.000 Ω
100.00 Ω
1.0000 kΩ
10.000 kΩ
0.05% + 50 mΩ
0.05% + 50 mΩ
0.05% + 500 mΩ
0.1% + 10 Ω		0.07% + 70 mΩ
0.07% + 70 mΩ
0.07% + 0.5 Ω
0.15% + 15 Ω
Frequency
1.00 to 110.00 Hz
110.00 Ω
1.0000 kΩ
10.000 kΩ
0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.05 Hz
0.5 Hz
0.005 Hz
0.05 kHz

Source Accuracy

1 Year
2 Years
Voltage DC
100.000 mV
1.00000 V
15.0000 V
0.01% + 0.005 mV
0.01% + 0.00005 V
0.01% + 0.0005 V
0.015% + 0.005 mV
0.015% + 0.0005 V
0.015% + 0.0005 V
Current DC
22.000 mA (Source)
Current Sink (Simulate)
0.01% + 0.003 mA
0.02% + 0.007 mA		0.02% + 0.003 mA
0.04% + 0.007 mA
Resistance
10.000 Ω
100.00 Ω
1.0000 kΩ
10.000 kΩ		0.01% + 10 mΩ
0.01% + 20 mΩ
0.02% + 0.2 Ω
0.02% + 3 Ω		0.015% +15 mΩ
0.015% + 30 mΩ
0.03% + 0.3 Ω
0.03% + 5 Ω
Frequency
0.1 to 10.99 Hz
0.01 to 10.99 Hz
11.00 to 1099.9 Hz
1.100 to 21.999 kHz
22.000 to 50.000 kHz

0.01 Hz
0.01 Hz
0.1 Hz
0.1 Hz
0.002 kHz
0.005 kHz

Technical Data


Data Log Functions
Measure Functions:

Reading Rate:

Maximum Record Length:
Voltage, current, resistance, frequency, temperature, pressure

1, 2, 5, 10, 20, 30, or 60 readings/minute

8000 readings (790 for 30 or 60 readings/minute)

Ramp Functions
Source functions:

Rate:

Trip detect:
Voltage, current, resistance, frequency, temperature

4 steps/second

Continuity or voltage (continuity detection not available when sourcing current)
Loop Power Function
Voltage:
Accuracy:
Maximum current:
Maximum input voltage:
Selectable, 26 V
10%, 18 V minimum at 22 mA
25 mA, short circuit protected
50 V DC
Step Functions
Source Functions:

Manual Step:
Autostep:
Voltage, current, resistance, frequency, temperature

Selectable step, change with arrow buttons
Fully programmable for function, start delay, stepvalue, time per step, repeat


Product brochures

Fluke 753 754 750 Series Datasheet

Articles

Fluke Calibrating Pressure Switches with a DPC Application Note
Fluke Pressure Calibration Application Note

Product price lists

Fluke Process Tools Selection Guide 2011

Product manuals

Fluke 750 Series User Manual
No user reviews available.
Recommended Accessories
The Fluke 753 Documenting Process Calibrator has 59 recommended accessories.        Click to show all accessories


Cases
Name Price Quantity
Fluke C799 Soft Field Case $69.95
Cases
Name Price Quantity
Fluke C781 Meter Case $53.95
Cases
Name Price Quantity
Fluke C700 Hard Carrying Case $218.95
Pressure Modules
Name Price Quantity
Fluke 700P06 Gage Pressure Module (100 psi) $1,229.95
Fluke 700P07 Gage Pressure Module (500 psi) $1,229.95
Fluke 700P27 Gage Pressure Module (300 psi) $1,229.95
Fluke 700P29 Gage Pressure Module (3000 psi) $2,006.95
Fluke 700P08 Gage Pressure Module (1000 psi) $1,229.95
Fluke 700P31 Gage Pressure Module (10000 psi) $2,006.95
Fluke 700PD7 Dual Pressure Module (-15/200 psi) $1,418.95
Fluke 700P04 Differential Pressure Module (15 psi) $1,229.95
Fluke 700PA4 Absolute Pressure Module (15 psi) $1,418.95
Fluke 700P30 Gage Pressure Module (5000 psi) $2,006.95
Fluke 700PV4 Vacuum Pressure Module (-15 psi) $1,418.95
Fluke 700P00 Differential Pressure Module (1 in. H2O) $1,652.95
Fluke 700P05 Gage Pressure Module (30 psi) $1,229.95
Fluke 700PA6 Absolute Pressure Module (100 psi) $1,418.95
Fluke 700PD3 Dual Pressure Module (±5 psi) $1,418.95
Fluke 700P02 Differential Pressure Module (1 psi) $1,229.95
Fluke 700P24 Differential Pressure Module Wet (15 psi) $1,229.95
Fluke 700PD5 Dual Pressure Module (-15/30 psi) $1,418.95
Fluke 700PD4 Dual Pressure Module (±15 psi) $1,418.95
Fluke 700PA3 Absolute Pressure Module (5 psi) $1,418.95
Fluke 700PD6 Dual Pressure Module (-15/100 psi) $1,418.95
Fluke 700P09 Gage Pressure Module (1500 psi) $1,229.95
Fluke 700PCK Pressure Calibration Kit $992.95
Fluke 700PD2 Dual Pressure Module (±1 psi) $1,418.95
Fluke 700PV3 Vacuum Pressure Module (-5 psi) $1,418.95
Fluke 700P22 Differential Pressure Module Wet (1 psi) $1,229.95
Fluke 700P03 Differential Pressure Module (5 psi) $1,229.95
Fluke 700P23 Differential Pressure Module Wet (5 psi) $1,229.95
Fluke 700P01 Differential Pressure Module (10 in. H2O) $1,229.95
Fluke 700PA5 Absolute Pressure Module (30 psi) $1,418.95
Fluke 700PRV-1 Pressure Relief Valve Kit $638.95
Process Tools
Name Price Quantity
Fluke 700HTH Hydraulic Test Hose $473.95
Fluke 700PMP Pressure Pump $419.95
Fluke 700-IV Current Shunt $344.95
Software
Name Price Quantity
Fluke 700SW DPC/TRACK Software $2,417.95
Temperature
Name Price Quantity
Fluke 80PK-25 SureGrip Piercing Temperature Probe $95.95
Fluke 80PK-1 Bead Probe $27.95
Fluke 80CK-M type K Male Mini-Connectors $23.95
Fluke 80PK-8 Pipe Clamp Temperature Probe $149.95
Fluke 80PK-26 SureGrip Tapered Temperature Probe $101.95
Fluke 80PK-9 General Purpose Probe $49.95
Fluke 80PK-22 SureGrip Immersion Temperature Probe $81.95
Fluke 80CJ-M type J Male Mini-Connectors $23.95
Fluke 80PT-25 SureGrip Piercing Temperature Probe $95.95
Fluke 700TC1 Thermocouple Plug Kit $89.95
Fluke 80PK-EXT Extension Wire Kit $47.95
Fluke 80PK-24 SureGrip Air Temperature Probe $101.95
Fluke 80PJ-EXT Extension Wire Kit $47.95
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe $269.95
Test Leads
Name Price Quantity
Fluke AC285 SureGrip Large Alligator Clip $19.95
Fluke TL950 Mini-Pincer Test Lead Set $35.95
Fluke TL940 Mini-Hook Test Lead Set $20.95
Fluke AC220 SureGrip Alligator Clips $33.95
Fluke TP920 Test Probe Adapter Kit $33.95
Fluke AC280 SureGrip Hook Clips $29.95
Fluke TP74 Lantern Tip Test Probe Set $15.95

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: